Mineral wool blanket is a flexible rolling product covered with iron wire mesh, stainless steel wire mesh or glass fiber cloth. It is used mainly for the insulation of large sized pipe and tank, large equipment, special shape components, valves and pipe fittings. Iron and stainless steel wire mesh blanket is especially suitable for thermal insulation of high-temperature equipment.
Mineral wool roll is a flexible rolling product. It is used mainly for large sized pipe and special shaped components, valves and pipe fitting, as well as thermal insulation and air conditioning systems for the wall and roof of buildings.
Faced roll is a mineral wool roll covered with aluminum foil or other covering materials for moisture proof and enhancing strength.
Product Specifications
| Size and tolerance of mineral wool lamella |
unit: mm |
 |
blanket with glass fiber cloth |
blanket with iron or stainless steel wire mesh |
| 60 |
80 |
100 |
80 |
100 |
120 |
150 |
| 25 |
|
10 |
10 |
10 |
10 |
10 |
10 |
| 30 |
|
8 |
8 |
8 |
8 |
8 |
6 |
| 40 |
6 |
6 |
6 |
6 |
6 |
6 |
5 |
| 50 |
5 |
5 |
5 |
5 |
5 |
5 |
5 |
| 75 |
3 |
3 |
3 |
3 |
3 |
3 |
3 |
| 80 |
3 |
3 |
3 |
3 |
3 |
3 |
3 |
| 100 |
2.5 |
2.5 |
2.5 |
2.5 |
2.5 |
|
|
Properties of mineral wool blanket
1. Thermal conductivity coefficient: ¡Ü0.44W/m.k (average test temperature 70¡À52¡æ)
(Only includes substrate, with covering material and suture not included)
2. Thermal load contraction temperature (maximum application temperature): £¾600¡æ
3. Other special sizes, the density may have custom-made according to the customer request consultation. Other special sizes, the density may have custom-made according to the customer request consultation.
Density of mineral wool lamella: 100-180kg/m3, tolerance: +20%, -10%. Other performance parameters are the same as that of mineral wool board.
Mineral wool roll density and size reference
|
60 |
80 |
100 |
| 25 |
|
10 |
10 |
| 30 |
|
10 |
10 |
| 40 |
6 |
6 |
6 |
| 50 |
5 |
5 |
5 |
| 75 |
|
3 |
3 |
Properties of mineral wool roll
1. Thermal conductivity coefficient: ¡Ü0.44W/m.k (average test temperature 70¡À52¡æ)
2. Thermal load contraction temperature (maximum application temperature): £¾600¡æ
3. Other special sizes, the density may have custom-made according to the customer request consultation.
All performance parameters comply with the requirements of ASTM C 612, JIS A 9504 and other standards.
Product implementation standard
Q/T0IH 8-2005
Packaging, transportation and storage
Product is packed in polythene plastic thermal-shrink film or plastic bag.
During transportation and storage, keep product away from moisture and compressive deformation. |
